| Author |
Message |
|
dem34
|
Post subject: Over 30 Volts Indicator  Posted: Wed Mar 12, 2008 8:06 pm |
|
Joined: Mon Oct 22, 2007 6:33 pm
Posts: 5
Location: Drexel University
|
|
If we are using a bank of LEDS to show when our accumulator storage containers contain over 30 volts but we are also covering the containers with fiberglass bodywork does the indicator need to be outside the body panels or does it not matter if it is covered when the body panels are attached?
|
|
  |
|
 |
|
admin
|
Post subject: Posted: Wed Apr 09, 2008 10:03 am |
|
 |
| Site Admin |
Joined: Tue May 16, 2006 11:34 am
Posts: 256
Location: Formula Hybrid Administration
|
|
It is not required that they be visible through the bodywork, but they should be immediately obvious to anyone considering opening up the accumulator containers.
Locating them so that they can be seen without removing any panels is preferable.
-Doug
|
|
| |
|
|
|
